FP Series On-Line Double-Conversion Single Phase UPS

HOME > Products > Uninterruptible Power Supply > FP Series On-Line Double-Conversion Single Phase UPS


To protect critical systems from power outage and sags is the FP Series line of true on-line UPS. FP Series UPS is designed for optimizing power quality with the ease of installation. The FP Series features:

  • Double Conversion.
  • Continuous battery charger and inverter for primary power path.
  • Constant battery connection to inverter and load.
  • Guarantee full power operation during power failure.
  • No voltage drop and zero transfer time.
  • Light weight unit.
  • Hot-swappable battery.
  • User-friendly graphic LCD.
    • UPS manufacturer
    FP series On-Line Double-Conversion Single phase UPS 
    Tower type/Rack Mount type, allows more flexibility to maximize space
     
    Catalog
    (120V)  FP1000 1kVA
                 FP1500 1.5kVA
                 FP2200 2.2kVA
                 FP3000 3kVA
    		(230V)  FP1000 1kVA
                 FP1600 1.6kVA
                 FP2500 2.5kVA
                 FP3200 3.2kVA
    Features & Benefits
    Flexuble Mounting Orietation
    Allows system integrators more flexibility in designing their backup power system to maximize space. With the rotatable LCD design, installers can mount the UPS vertically or horizontally.
    User-friendly Graphic LCD
    This robust LCD display enables field service engineers to easily troubleshoot the UPS without opening the box, thus reducing downtime.
    Single Voltage Battery Pack Design
    A 48VDC battery pack allows installers to take the headache out of battery installation. Installers can now simply slide the used battery packs are interchangeable unit and replace it with a new pack. All FP battery packs are interchangeable reducing the risk of system failures.
    Light Weight Design
    The FP model is specifically designed for field installation. The light weight design requires only a single installer to put the system in place. This will significantly reduce on-the-job injuries and installation fees.
    User-Remote Interface
    The off-site user can now test, set parameters, monitor power status, save file, and shutdown the system all via remote interface. The user-remote interface includes SNMP/HTTP Card, RS232, USB, DB9, and AS400 interface.

    Mechanical Overview
    Standard Accessories
  • Mounting Feet: two ( 2 ) mounting feet for tower configuration are supplied with the FP Series UPS 1KVA to 1.6 KVA. All other models 2.2 KVA to 3.2 KVA are self supporting.
  • Packing Ears: standard 19 rack mounting ears are available for all FP Series UPS models.
    • Graphic LCD Display
  • Buzzer: when the buzzer in normal operation, the symbol will flash
  • Green Mode: when ups is in Green Mode, the symbol will flash
  • Fault: UPS has failed and must be repaired
  • Test: when UPS is conducting DC Test under AC Mode, the symbol will flash
  • Load: the higher the load, the more bars will illuminate
  • Inverter: when UPS is in Inverter Mode, the symbol will illuminate
  • PFC: when PFC is normal, the symbol will illuminate
  • Line: when utility power is normal, the symbol will illuminate
  • Charger: when Charger is in normal, the symbol will illuminate
  • Boost: when UPS starts Battery Booster, the symbol will illuminate
  • Battery: the higher the battery voltage, the more bars will illuminate. Every bar represents 25% of battery capacity
  • Fan ( High Speed ): In DC Mode
  • Fan ( Medium Speed ): In AC Mode
  • Fan ( Low Speed ): In By-Pass Mode

    • Intelligent Power Management Software
    Cruiser
    Users able to customize various Cruiser controls such as warning method, alarm messages and several shortcut icons to easily access the most commonly used functions. Cruiser can send warning messages to a pager, via e-mail or over the LAN, this providing an early warning system for power failures, system shutdown and a variety of other sections. It guarantees a faster response time, even when you are not in the office.
  • Green mode supported.
  • FPC status display.
  • Cross platform supported.
  • UPS monitoring utility.
  • Scheduled system shutdown.
  • Graphic display of UPS status.
  • Warning notification via e-mail or pager.
  • Customized controls.
  • User-definable warnings.
  • Multi-language versions.
  • "Read & Write" functions when setting output voltage and frequency ( optional ).
    • Interface & OS Compatibilities
  • RS232
    Windows: Win95, WinNT4.0, Win98SE, Win2000, WinMe, WinXP
    Linux: 7.0 ~ 7.3, 8.0 ~ 8.4, 9.0
    Mandrake: 8.2. 8.3, 8.4, 9.0
    Novell: 4x, 5.1
  • USB:
    Windows: Win98SE, Win2000, WinMe, WinXP

    • Uninterruptible Power Supply, Rectifier for Telecomminication, Uninterrupted Power Supply